Load data for .219 Zipper + .224 | 45gr | Sellier & Bellot SPRN

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.224 \| 45gr \| Sellier & Bellot SPRN
Manufacturer SKU:	2911
Bullet Weight:	45gr \| 2.9g
Bullet Diameter:	0.224" \| 5.69mm
Bullet Length:	0.539" \| 13.7mm
Caliber:	.219 Zipper load data
Case Length (l3):	1.933" \| 49.1mm
Cartridge Length (C.O.L.):	2.226" \| 56.5mm
Seated Depth:	0.246" \| 6.2mm
Shank Seated Depth:	0.246" \| 6.2mm
Case Capacity:	34.0 Grains of Water \| 2.21 cm³
Primer Size:	Small Rifle (SR)
Max. allowed Pressure:	41336 psi \| 2850 bar
LID:	LID_B7201_C58
Last updated:	2025-01-01

Load data for 42 loads in caliber .219 Zipper with .224 | 45gr | Sellier & Bellot SPRN bullet and 21 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	83%	36376	88%	**82	93%
Accurate 2015	<<locked>>	89%	36753	89%	**76	96%
Accurate 2495	<<locked>>	95%	36622	89%	**64	96%
Alliant AR-Comp	<<locked>>	92%	36274	88%	**45	98%
Alliant Reloder-10x	<<locked>>	85%	36535	88%	**99	97%
[Hodgdon H322]*	<<locked>>	89%	36376	88%	**82	93%
[Hodgdon H335]*	<<locked>>	84%	36941	89%	**89	92%
Hodgdon TrailBoss	<<locked>>	96%	29820	72%	**98	100%
[IMR 3031]*	<<locked>>	96%	35317	85%	**12	94%
IMR 4198	<<locked>>	83%	36100	87%	**50	98%
[Norma 202]*	<<locked>>	94%	37173	90%	**99	93%
ReloadSwiss RS 14	<<locked>>	96%	29385	71%	**44	100%
[Rottweil R 901]*	<<locked>>	90%	36289	88%	**40	92%
[SNPE Vectan Tubal 3000]*	<<locked>>	91%	36796	89%	**94	92%
[SNPE Vectan Tubal 5000]*	<<locked>>	96%	35404	86%	**58	93%
[Somchem S335]*	<<locked>>	92%	36738	89%	**17	94%
Vihtavuori N130	<<locked>>	87%	35839	87%	**07	97%
Vihtavuori N133	<<locked>>	94%	36811	89%	**36	96%
[Vihtavuori N135]*	<<locked>>	96%	29269	71%	**79	92%
[Vihtavuori N140]*	<<locked>>	95%	36376	88%	**46	93%
[Vihtavuori N540]*	<<locked>>	96%	36651	89%	**79	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	81%	33968	82%	**20	92%
[Accurate 2015]*	<<locked>>	81%	28500	69%	**33	93%
[Accurate 2495]*	<<locked>>	85%	25715	62%	**30	91%
[Alliant AR-Comp]*	<<locked>>	81%	25338	61%	**84	93%
Alliant Reloder-10x	<<locked>>	81%	31691	77%	**61	95%
[Hodgdon H322]*	<<locked>>	83%	30472	74%	**12	90%
[Hodgdon H335]*	<<locked>>	81%	33243	80%	**81	91%
Hodgdon TrailBoss	<<locked>>	80%	23192	56%	**18	100%
[IMR 3031]*	<<locked>>	90%	29472	71%	**25	91%
IMR 4198	<<locked>>	81%	33678	81%	**74	97%
[Norma 202]*	<<locked>>	90%	32329	78%	**58	90%
ReloadSwiss RS 14	<<locked>>	80%	22974	56%	**64	100%
[Rottweil R 901]*	<<locked>>	87%	32721	79%	**38	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	88%	33228	80%	**99	91%
[SNPE Vectan Tubal 5000]*	<<locked>>	91%	29718	72%	**00	90%
[Somchem S335]*	<<locked>>	85%	29704	72%	**20	90%
[Vihtavuori N130]*	<<locked>>	81%	30081	73%	**46	94%
[Vihtavuori N133]*	<<locked>>	83%	26876	65%	**35	91%
[Vihtavuori N135]*	<<locked>>	94%	27224	66%	**04	90%
[Vihtavuori N140]*	<<locked>>	91%	31676	77%	**12	90%
[Vihtavuori N540]*	<<locked>>	92%	33112	80%	**77	91%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data